Vogelzang TR002B User Manual download pdf (Page 13)

TR002B | 20120125.0 www.vogelzang.com SHILOH™ | Page 13

Fig. 18 - Chimney Connection to Firebox

Through Masonry Wall

CHIMNEY CONNECTIONS continued …

continued on next page

VENTING TO EXISTING FIREPLACE

In some instances, people desire to convert an

existing ﬁreplace for stove use. Usually, safe connec-

tion to an existing masonry chimney requires more

work than using a prefabricated chimney. The existing

ﬁreplace must be closed and sealed at the damper with

high-temperature caulk, ceramic wool, or furnace ce-

ment. Prior to installation, clean and inspect the existing

ﬂue and smoke shelf. Installation should be designed

so the system can be dismantled for periodic cleaning

and inspection. Before conversion, make sure the

existing chimney is structurally sound, the chimney

incorporates a ﬂue liner and make sure it is in good

condition. (A ﬂue liner consists of clay tile that protects

the brickwork of a chimney. If a chimney does not have a

liner, or it is damaged, have it relined by a professional.

Do Not use a chimney that is unlined or damaged!)

If you have any question regarding the condition of the

chimney, consult a qualiﬁed licensed contractor, qualiﬁed

engineer, competent mason, certiﬁed Chimney Sweep,

or a knowledgeable inspector. Consult your insurance

company if you cannot ﬁnd a qualiﬁed expert.

CAUTION: NOT ALL FIREPLACES ARE SUIT-

ABLE FOR CONVERSION TO ACCOMMODATE

A WOOD STOVE. CHECK WITH A QUALIFIED

EXPERT.

Many prefabricated ﬁreplaces are of the “zero-

clearance ﬁreplace” category. These consist of multi

layered metal construction. They are designed with

enough insulation and/or air cooling on the base, back

and sides so they can be safely installed in direct con-

tact with combustible ﬂoors and walls. Although many

prefabricated ﬁreplaces carry endorsements from na-

tionally recognized organizations for use as ﬁreplaces,

they have not been tested for connection to wood stove

heaters. Connecting a stove to such a device will void

the manufacturer’s warranty.

Venting a stove directly into a ﬁreplace does not

meet code and should not be attempted. The stove war-

ranty will be void with such an installation. Do not create

a hazard in your home by connecting in this manner.

Fig. 19 - Fireplace Conversion

FIREPLACE INSTALLATION

NOTE: DO NOT ATTEMPT TO ROUTE THE

CHIMNEY CONNECTOR PIPE THROUGH THE

THROAT OF THE FIREPLACE.

Directly connecting the stovepipe into the existing

masonry chimney (ﬁgure 15 “Type A” Fireplace Conver-

sion) of the ﬁreplace is the only approved method of

installation. This is a complicated and involved process

and to insure safety should only by done by a qualiﬁed

installer.

1. An entry hole must be cut through the masonry

and tile liner with minimal damage to the liner. At

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Comments to this Manuals

No comments

Vogelzang TR002B User Manual Page 13

Comments to this Manuals

Related products and manuals for Kiln Vogelzang TR002B